About Us

Providence Corrosion is an Alberta based corporation dedicated to providing corrosion consulting services for the oil and gas industry in Western Canada.

We are committed to deliver safe, innovative, quality and cost effective solutions to our customers to ensure the integrity of their infrastructure.

At Providence Corrosion, we are convinced that the Cathodic Protection industry needs a renewed approach through the use of:

a. Better trained and more skilled, talented technicians

b. State-of-the-art technology.

Providence Corrosion was formed to offer an innovated option to the Oil and Gas Industry in regards to Integrity Management.

Conventionally, the CP industry is perhaps one of the few that has been utilizing the same methodologies and procedures for over a century. Keep using these same practices is not only ineffective and costly but unsustainable considering our vast and aged infrastructure and the labor shortage that Canada and specially our province is facing.

Furthermore the CP industry has been focused so much on performing routine work to meet minimal regulatory requirements that “untypical” corrosion situations are often overlooked with undesired consequences.

Please do not hesitate in contacting us, to discuss in detail how our innovated ideas can benefit your organization.

Our Services

Providence Corrosion provides a variety of products and services to protect your assets from external corrosion in a cost effective way using skilled, talented technicians and conventional and state of the art techniques as required.

Our Service

 

Cathodic-Protection200x150Cathodic Protection (CP) is a corrosion control method that first known use was almost 200 years ago. It is widely employed to protect buried or submerged metallic structures against corrosion.
In the province of Alberta there are approximately 415,000 kilometres of oil and gas pipelines under the jurisdiction of the provincial regulator. This entire infrastructure requires an effective CP system effectively operating 24/7.
We can assist your company in maintaining the integrity of these valuable assets by providing a superior external corrosion protection system. We excel in all phases of CP, including the engineering FEED phase, detailed design, construction management and execution, commissioning, operation,
maintenance, regulatory surveys, specialized testing, etc. 

Do not hesitate to contact us to improve through innovative techniques the CP aspect in your operations.

  • External-Corrosion-Direct-Assesments-267x200

    The external corrosion direct assessment (ECDA) is a structured process developed by NACE International in 2001 and is intended to improve safety by assessing and reducing the impact of external corrosion on pipeline integrity.

    ECDA is an effective preventative measure as it can detect areas where

    defects may form in the future rather than only identifying areas where

    defects have already formed.

    ECDA applications can include but are not limited to assessments of external corrosion on pipeline segments that:

    *       Cannot be inspected using other inspection methods

    *       Use innovative inspection methods to identify areas of future corrosion

    *       Establish a reassessment interval

    *       Manage future corrosion as an area of primary interest.

    ECDA may detect other pipeline integrity threats, such as mechanical damage, stress corrosion cracking (SCC), and microbiologically influenced corrosion (MIC).

Surveys-and-Inspections-200x267Field inspection/survey is a fundamental component of any integrity management plan.
We conduct regulatory CP surveys, specialized pipeline integrity surveys, above-ground inspections, aerial surveillance, stress-corrosion cracking direct assessment (SCCDA), grounding system inspection, soil corrosiveness surveys, cathodic rectifier monitoring programs, external corrosion direct assessment (ECDA) techniques such as CIS, ACVG, DCVG, PCM, DOC, dig
integrity programs, coating inspections and evaluations, water-body crossings, pressurized and rotary equipment inspections, etc.
We execute this work using in-house and external corrosion technologists and engineers that are either NACE or API certified.

  • AC-Mitigation-200x267The design of a pipeline in close proximity to a high-voltage transmission powerline must address safety and pipeline integrity issues relating to AC interference in accordance with current regulations. Pipeline operations and pipeline integrity personnel can both be at risk from induced AC voltages and elevated ground voltages due to phase faults and lightning strikes.

    Three coupling modes can exist between the transmission powerline and the pipelines as detailed below:

    *       Electromagnetic (inductive) coupling: can result in hazardous voltages and current being induced on buried or above ground pipelines that are paralleled by a nearby transmission powerline

    *       Electrostatic (capacitive) coupling: is experienced during the construction of a pipeline, where long sections of pipe may rest above-ground near a high-voltage transmission powerline.

    *       Ground current (conductive) coupling: can cause hazardous voltages on buried pipelines when a short circuit current from a phase-to-ground fault enters the ground near the fault location and returns to the substation through the earth and nearby metallic conductors.

 Thanks to state-of-the art simulation software, we offer AC interference engineering assessment services.

team picOur team of consultants focus on providing full lifecycle integrity management and operations support. We offer a unique blend of technical expertise and extensive practical and on-site experience.

For either green or brown projects and operations requiring cost-effective solutions to extend the service life of your pipeline network or pressurized equipment, our experts execute programs to ensure the safe and reliable operation of these assets. Our NACE and API Certified Integrity Specialists have extensive experience in developing corrosion prevention FEED, Detail
Design, Fitness for Service Assessments, Engineering Specifications, Integrity Management Programs that are compliant with applicable customer and industry regulations, standards, and recommended practices including API, ASME, NACE and CSA.

Materials200x267We provide a wide range of CP materials and the technical support necessary in the selection of appropriate materials.  Some of the materials we supply include rectifiers, sacrificial and impressed current anodes, test stations, junction boxes, reference electrodes, flange insulation kits, direct burial cable, remote monitoring devices, isolation/fault protection devices, casing
insulators, etc.

Phone Number

(855) 776-2671

Address

Unit 201 2577 Bridlecrest Way SW Calgary, AB T2Y5J4, Canada

E-Mail

info@providencecorrosion.ca

Our Team

Mario Salgado our Technical Director has over 15 years international experience in corrosion Engineering with emphasis in Cathodic Protection. His scope of work includes detailed design, consultant services in the oil and gas industry, specialized field surveys and testing, data analysis, reporting and construction supervision. Mario holds a NACE Cathodic Protection Specialist Certification. He has been active with NACE International since 2000. Mario is also an accredited CP Instructor. Mario is currently the owner of Providence Corrosion.

Providence Corrosion Technicians are very well trained holding various CP NACE certifications.

Industry News

Certifications & Associations

CQN Image NACE International cor logo PICS2 ISNetworld pictureComplyworks2APEGA

Contact Us

Careers

There are no available positions at this moment but we are always looking for talented individuals to join our team, you can send us your resume to careers@providencecorrosion.ca